It is made of pure viscose Artificial Fur, which has good hygroscopicity, comfortable wearing, bright color, and low price. Artificial wool fabrics used for clothing are generally resin-finished. Its disadvantage is that it is not resistant to friction, easy to pilling, and has poor washing fastness. After washing several times, the body becomes soft and easy to wrinkle.
Soak it in cold water for 30 minutes before washing. When washing, it should be pushed and kneaded in the basin, or it can be spread on a clean board and brushed with a soft brush. Either way, rub and brush lightly to avoid injury to the fabric or resin shedding.
When washing, you can choose neutral soap or washing powder, the washing temperature should be low, avoid the sun and fire, and hang it in a ventilated place.
How to keep faux fur clothes supple
the first method:
Add the detergent to the water basin, and pour in some water, stir the water in the basin with a soft brush like this, stir up rich foam, then use a soft brush to clean the plush surface with the foam, -Be careful not to get too much moisture on the brush. After brushing the plush surface, wrap it in a bath towel, and put it in a basin full of clean water for pressure washing, so that the dust and washing liquid in the plush can be removed. Then put the plush into the water basin with softener and soak it for a few minutes, and press and wash it several times in the water basin filled with clean water until the water in the basin becomes clear from turbidity. The cleaned plush is still wrapped in a bath, put into the washing machine for dehydration, the dehydrated plush is shaped and combed, and then placed in a ventilated place to dry, so that your plush will be like new again.
The second method:
First, go to the supermarket and spend 2 yuan to buy a pack of coarse salt, which is coarse salt, put the coarse salt and the dirty wool together in a plastic bag, then fasten the bag and shake the ribs dozens of times. This time, you will find that the plush is clean. The coarse salt taken out turns gray due to the adsorption of dirt.
The principle of this coup is to use the adsorption effect of salt, namely sodium chloride, on dirt. At the same time, the salt acts as a sterilizer.