Printing plush process flow imitating super soft short plush

Printing plush process flow imitating super soft short plush

1. Screen
　　Since the woolen printed fabric has more pulp, the 76-83 mesh nylon screen is selected for the imitating super soft short plush after testing. The imitating super soft short plush color paste has good net permeability and smooth pattern outline.

2. Description
　　When tracing the manuscript, the pattern should be properly retracted according to the length of the plush and the thickness of the slurry.

3. Dyes
　　After plush printing, it needs to go through high temperature finishing such as steaming, setting, imitating super soft short plush, etc. When choosing printing dyes, you should pay attention to:
　　① It is advisable to use dyes with the same compatibility value, at least the dyes with similar compatibility values, otherwise, use dyes with a large difference in compatibility values ​​to color together, and the fixing conditions (steaming time and temperature) after printing will change. , Will cause color changes.
　　② The imitation super soft short plush should be mixed with dyes with good ironing fastness, otherwise the printed fabric will be finished after high temperature and the color will change and it will be difficult to meet customer requirements.

4. Paste
　　The choice of paste is very important. Super soft short-pile-like fleece fabrics should be selected for water-holding, ultra-soft short-pile-like pastes with good permeability and high adhesion to acrylic. After repeated screening, it is considered that hydroxyethyl honey locust glue It is more suitable to fight emulsified paste A. This is because the hydroxyethyl honey locust gum has good water holding capacity and high adhesion, but it is easy to block the screen; and the emulsified paste A has good permeability, has a lubricating effect, and does not block the screen.

5. Printing
　　According to the specifications of the plush cloth, the size of the pattern, and the thickness of the imitation super soft short plush slurry, determine the number of scraping and printing. The paste must be thin, sticky and uniform, otherwise the imitation super soft short plush will appear after penetration. Ulcerated. After printing, the fabric does not need to be dried. The imitation super soft short plush should be penetrated immediately. The imitation super soft short plush printed plush is preliminarily finished, and the pattern is exquisite and clear.